Is there a one-size fits all showerhead that can please everyone in your home? You can take all the time you want to go around the hardware and home improvement...
According to statistics, water leaks are the most common plumbing problems experienced by average households in the country. However, do you have an idea what are the common sources of water leaks in homes? Knowing the potential sources of leaks in your home helps you to anticipate the problem and be more prepared for it. Here are some information that can be found useful.
There will be little debate on this one considering that faucets are the most used plumbing fixture in every home. In fact, when you think about it, faucets out number almost any other plumbing fixture you might have. Your sink, bathtub, and even your showerhead has a faucet.
Now, the number of moving parts of the faucet depends on the type that you have. If you have the older compression type faucets, then you are more likely to experience water leaks. This is because the seals and washer of this type of faucet can easily wear out. Factor in the constantly changing pressure that faucets experience when you connect and disconnect hoses to it and you are making the problem worse.
When it comes to faucets, leaks can be found on the spout, the handles, and even the supply line hoses. Possible signs of water leaks would be any type of discoloration on the sink, fixtures, or even the tiles in your bathroom.
One of the reasons why the dishwasher is a common source of water leak is the amount of water that goes through it. Just imagine that amount of water combined with a broken seal and you are looking at water spreading through your entire kitchen floor.
For dishwashers make sure to check under the sink so you can spot water leaks before it gets any worse. This appliance is normally connected to the main drain so if there is any discoloration or wet spots on the floor, chances are the leak is somewhere along the hose. You should also inspect the base of the dishwasher regularly especially if you see warping tiles, discolored floors, and water spots on your cabinets.
How old is your water heater? If you have a unit that is already 10 years old, then you should be aware that the possibility of it having water leaks is extremely high. The reason is that the older water heaters get, the more prone it becomes to rust and corrosion. When this happens, water leaks happen easier because of the degraded condition of the unit.
How can you delay this? One of the best ways is to make sure that a licensed professional inspects the heating unit at least once every 2 years. After the warranty runs out, the water heater should be inspected every year. The water tank should also be drained periodically to flush out sediments.
Next to faucets, toilets may be the most commonly used plumbing fixture in your home. The scary thing with toilets is that water leaks can happen suddenly because of failure of its components or busted supply lines. Sometimes the problem starts out slowly and because of neglect, it escalates into something big really fast.
When you suspect a leaking toilet, make sure to close the shutoff valve to prevent more water from coming into the system. This also gives you a chance to inspect the source of the leak without risking a flooded bathroom.
Water should be inside the machine, but, when it ends up on the floor, you know that you are looking at trouble. The good news is that there are things you can do to minimize the possibility of this happening.
First step is to replace the old hoses with stronger steel braided ones. Washing machine hoses must be replaced every 5 years or earlier if they begin to look deteriorated. Make sure to cut the water supply to the machine as well if you are going away on vacation.
Now you know where to look when you suspect that you have water leaks so it should be easier for you to deal with it. Make sure that you call a licensed professional plumber as soon as you see signs of water leaks. Visit newportbeach-plumber.com for more information.