When it comes to issues of water pressure and water flow, the problems can often be puzzling.  This is where the services of highly trained, skilled, and experienced plumbing technicians really become handy.

Would you really want to challenge yourself why the water flow is weak or why water pressure in some rooms is strong while almost non-existent in other parts of your home?

However, it is good to have an idea of the problem before calling for professional help. You can contact www.valleyglenplumbing.com if you need one. They has skillful team to help you.

So here are some of the more common concerns when it comes to water pressure and water flow.

  1. Why is it that there is no water flowing anywhere in the home except for a single area?

no water flowing

This is the rule of thumb, when it comes to no or low water flow, always look at the simplest solution.  Remove and clear the strainers of the faucets.  Remove top of toilet fill valves, flushed, and replaced.  This is done to compensate for the flushing being done by the local water district that breaks debris and eventually ends in the pipes of many homes.

In this instance the debris are scattered all over the plumbing system of your home clogging up the faucets and valves resulting in this condition.

  1. How can calcium buildup be removed and prevented?

Calcium buildup

Did you know that calcium buildup in copper pipes is a very rare condition?  This does not mean that it is impossible.  Calcium buildup can happen when excessively high calcium levels are present in the water.  Having said this, the best way to remove and prevent calcium buildup is to have water softeners installed in your system.

The water softener will treat the water, save your pipes, and other plumbing appliances like dishwashers, washing machine, and toilets.  There is no way to remove the calcium in the pipes using any commercial or industrial solution that will not endanger your potable water supply. In fact, government regulations prevent plumbers from treating the insides of copper pipes because of the potential dangers.

Is it hopeless?  Not exactly!  Vinegar is often used for treating pipes, but this translates to huge amounts of vinegar that must be allowed to sit in your pipes overnight at the very least.  All the water in the pipe must also be flushed out.

Does this work?  Presumably yes, because of the ability of vinegar to dissolve calcium and minerals.  After this treatment you have to flush the pipes and you would have to live with the harmless vinegar-like taste of your water for some time.

Is there an easier solution?  For one, you can replace the copper pipes with PEX plastic ones.  This material is totally resistant to mineral buildups and has comparatively higher water pressure and flow rates compared to copper piping.  Seek professional advice before going through with this solution for proper evaluation of your plumbing pipes.

  1. Why is the inside water pressure poor even if the outside pressure is at normal level?

water pipe

When you are fairly certain that the outside pressure is roughly around 60 psi, there are some things that you must check in your home.

  • Verify all faucet strainers are not blocked;
  • Check for mineral buildup in aerators or strainers;
  • Make sure that the main valve is not halfway open; and
  • The meter valve should be completely turned on.

Are your pipes made from galvanized metal?  If so, the cause of the low inside pressure can be calcium and mineral deposits.  You have to be aware that galvanized pipes that are 30 to 50 years old can cause calcium to leech into the water and attach to the inside lining of the pipes.

The ion exchange will take place over time and will coat the entire length of the pipe causing the inner diameter to drastically reduce until water flow becomes almost impossible.

Did you know that deposits are almost as hard as the bones in your body making it difficult to remove them?  Using tools or liquid treatments can make the water dangerous for drinking afterwards.